Semi-automatic container spreader For operation with ISO standard 20`containers For operation with ISO standard 40`containers Rated lifting load 35T Rate lifting load 35T Self-weight 2.2T Self-weight 4.6T Allowable load 10% Allowable load 10% Spring stroke 100mm Spring stroke 100mm A...

GBD000 steel plate container spreader As the main devices of port steel lifting, GBD000 steel plate container spreader is concluded by Rotating hanger and steel plate spreader. When buying an crane to load steel plates, we need an appropriate spreader to match. This GBD000 spreader desig...

LTD-40 40feet Tire container spreader LTD-40 40feet Tire container spreader is evolved by LTD0000 and LTD0001 container spreader (cut off the retractable function), which is suitable for railway 20 or 40 feet container operation and the old crane. This spreader is typically designed for...

LTD-20 20feet Tire container spreader LTD-20 20feet Tire container spreader is evolved by LTD0000 and LTD0001 container spreader (cut off the retractable function), which is suitable for railway 20 or 40 feet container operation and the old crane. This spreader is typically designed for...

QXZZ bridge container spreader with a tilt device QXZZ bridge container spreader has tilt device in front and back, which is suitable for ports of inland region, where the vessels are small. In that case, each lifting containers can impact a lot on the position of the vessels, which needs the spread...

YESS01 360-degree hydraulic rotating retractable light spreader YESS01 360-degree hydraulic rotating retractable light spreader is also designed for gantry crane. Dead weight is 10T，compared to12.5T of YESS, is more suitable for the transformation of the old gantry crane container. The previous 40T gantry crane...

Operation guide of double cylinder(part 4) Operation guide of double cylinder(part 4) G.Break down diagnosis Breakdown Reason Solution way Grab can not close Oil cylinder non-return valve or valve group solenoid directional valve occured block. When close the grab,the solenoid valve must be i...

Operation guide of double cylinder(part 3) Operation guide of double cylinder(part 3) F.Maintenance and repair F-1. Grab Maintenance 1)---Lubricating points: All of the hinge joints of grab need to be lubricated, including stay bar joint, bucket slewing joint, chock slewing joint (excluding f...