Garbage grab classification

1.The clamshell type.  The clamshell consists of two giant clam slots with a forked tooth structure. The pressure is small and the grasping force is small . The tooth and body are bolted and easy to loosen; Big teeth, easy to wear; The teeth are stressed. This type of grab can be used to remove the ash from the incinerator if the tooth structure is reduced.

2.The orange peel type. The orange peel type usually has 5-8 clawed claps. When closed each claw is closed to a bucket form. When open, the tip of the claw is downward. The grab force of this type grab is large; Grasp the tooth and claw to adopt the welding method, very firm; Small teeth, wear resistant alloy; The scratching force is small.

3.The mechanical type. The mechanical type is driven by wire rope, which realizes the open and closed motion, and grabs the garbage by the grab dead weight and the inertia force.

4.The hydraulic type. The hydraulic cylinder directly drives the jaw valve to actuate the open and closed . The clamshell is driven by two hydraulic cylinders. The orange peel have single hydraulic cylinder and multiple hydraulic cylinder drive two ways. Hydraulic grab grab the garbage by the hydraulic cylinder;