Enter the installation site of the Marine telescopic crane with BANGDING MACHINERY

 

1.The fixed base below deck and the installation base need to be provided by the owner.

 

2. The connection of the cylinder and the pedestal is installed. The hydraulic system is put in the tube to prevent the wind from blowing in the sun and rain, and effectively extending the service life of the hydraulic telescopic crane.

 

3. From top to bottom of the house view, next to the driver's room. The customer has ordered two Marine hydraulic telescopic cranes and two cranes to debug the installation at the same time.

 

4. The connection between the main boom and the cylinder can be completed by the on-site crane. The installation progress needs to be highly coordinated with the site. It involves the people, the weather, the equipment and other factors.

 

5. The driver's operation room was soon installed due to the high level of coordination.

 

6. The telescopic boom waits for installation, a section of installation time, and the test of the operator's patience and the technical ability to guide the installation engineer.

 

7.The whole machine is installed, and the installation of a Marine hydraulic telescopic crane depends on teamwork.

 

8. The telescopic boom is fully extended, the scene personnel are not relaxed before the last ring is waiting to be tested.

 

9. After the installation is completed, it is necessary to carry out on-site test cranes for the Marine telescopic cranes, and the scattered steel in the field is the auxiliary tool.

 

This project is installed in the foreign tropical area, our factory sends engineers to the site to guide the installation. The engineer dispatched to overcome the physical discomfort caused by the water and soil challenge, finished the installation and commissioning of the project, The engineer may returned home until the owner satisfied with the receipt. Our professional attitude can stand the test.